DR. TONY GORSCHEK

 
 

Dr. Tony Gorschek is a Professor of Software Engineering at Blekinge Institute of Technology (BTH) and part time at Chalmers. He has over ten years industrial experience as a CTO, senior executive consultant and engineer, but also as chief architect and product manager. In addition he has built up five startups in fields ranging from logistics to internet based services. 

Currently he manages his own consultancy company, works as a CTO, and serves on several boards in companies developing cutting edge technology and products. His research interests include requirements engineering, technology and product management, process assessment and improvement, quality assurance, and practical innovation. He is a member of IEEE and ACM.



  1. 1.   Contact Information

Phone: +46 (0)708-254692

E-mail: tgo[“AT”]bth.se, tony.gorschek[“AT”]gmail.com


(academic part of CV can be seen below, observe - publications listed here or see publication link in the menu)


  1. 2.   Education


2.1    Completed Degrees


(2006) PhD in Software Engineering at Blekinge Institute of Technology, Ronneby, Sweden.

Title of thesis: “Requirements Engineering Supporting Technical Product Management”. Research and work performed in cooperation with Danaher Motion Särö AB, ABB Robotics, ABB Substation Automation and ABB Corporate Research. Advisor: Prof. Claes Wohlin. [download PhD thesis]


(2006) Bachelor of Science in Business Administration at Blekinge Institute of Technology, Ronneby, Sweden.(in parallel with my PhD studies). Title of thesis: “Success Evaluation and Measures in Software Process Improvement”. Research and work performed in cooperation with Danaher Motion Särö AB, ABB Robotics and ABB Corporate Research. Advisor: Prof. Lars Svensson.


(2004) Licentiate in Software Engineering at Blekinge Institute of Technology

Title of thesis: “Software Process Assessment and Improvement in Industrial Requirements Engineering”. Research and work performed in cooperation with Danaher Motion Särö AB and ABB Robotics. Advisor: Prof. Claes Wohlin.


(2002) Master of Science in Computer Science at Blekinge Institute of Technology.

Title of thesis: “Requirements Engineering Process Maturity Model”. Research and work performed on-site in cooperation with SchlumbergerSema, IM International, Lecan Technologies (Ireland) and Wistech (Ireland). Advisor: Prof. Rune Gustavsson.


(2000) Bachelor of Science in Computer Science (Finished top of my class – best student award) at Blekinge Institute of Technology.

Title of thesis: “A case study of Professional Web Development”. Research and work performed in cooperation with Jobado AB. Advisor: Dr. Jilles van Gurp.



3.    Work Experience


3.1    Current Employment


(2007-2011) Professor, Blekinge Institute of Technology (full time).


(2007-ongoing) Guest Researcher/Lecturer, Chalmers University of Technology.


(2006-ongoing) Senior Executive Consultant - docEngineering.




3.1    Previous Employment (selection only)


(2009-2012) CTO Qjuube.


(2007-2011) Associate Professor, Blekinge Institute of Technology (full time).


(2006-2008) Chief Technical Officer, Spidexa Technologies AB. Responsible for the entire development effort including recruitment of developers, product concept development, system analysis, design and architecture.


(2006-2007)  Research Associate, Blekinge Institute of Technology.

Research performed in close collaboration with ABB Corporate Research and DanaherMotion. Mainly in the areas of market-driven requirements engineering, technical product management and quality assurance. This involves process evaluation (identifying possibilities for improvement) and process improvement implementation activities (based on research results).


(2002 - 2006) PhD Student, Blekinge Institute of Technology.

Worked in close cooperation (partly on-site) with DanaherMotion and ABB Robotics, and ABB Corporate Research performing research but also implementing process improvement initiatives. The main research results have been adopted by the organizations, and further implementation is planned.


(2004) Consultant Project Manager (Development), Danaher Motion Särö AB.

Requirements Engineering, Analysis and Design of System Configuration Tools.


(2002) Consultant – Technical Advisor, 4Sight Investment AB.

Investigation and technical advising of board members and CEO.


(2001-2002) Consultant – Project Evaluation, Blizzway Solutions AB.

Investment analysis, project post-mortem, strategy planning for further development/integration in cooperation with third party organizations in India.


(2001-2002) Chief Technical Officer, Bid-Commerce.

Conception and realization of the product development phase of Bid-Commerce. Technically responsible for the development effort and managed the development performed by third party. Instrumental in negotiations with third party development company, assuring technical aspects, cost and time estimations, and contractual fulfillment.


(2000-2001) Chief Technical Officer and Operations Manager, Jobado AB.

This work was performed partly in parallel with work in Bid-Commerce (same owner group). The work at Jobado mainly involved being technical department head - responsible for personnel issues, budget, development strategy and project management in a department of 20 co-workers. The work offered challenges in many areas such as system development and coordination of work efforts and resources as well as systems engineering. Customer interaction and leading the development was a substantial part in the day-to-day work.


(1999, 2000) Project Manager – Alpha Days. Blekinge Institute of Technology.

Company lesion, budget responsible and official primary organizer for the convention involving guest lecturing, experimentation and interchange – Company partners: IBM, ORACLE, SEMA GROUP, Nortel Networks and WM-Data amongst others. The convention had about 1000 participants.


(1999) Network Technician, Lexicon Sweden AB.


(1999) Consultant – System Design and Development, HälsoInvest Blekinge.


(1999) Teacher’s Assistant, Blekinge Institute of Technology.


(1998) Project Manager ViNET, Blekinge Institute of Technology.

Project Manager for software development.



4.    Commissions of Trust (in industry and academia)


(2013-ongoing)  Board member University Board Blekinge Institute of Technology.


(2012-ongoing) Board member SARE- Swedish Association for Requirements Engineering (www.sare.se).


(2011-ongoing) Board member Sigrun- Software Innovation and Engineering Institute (www.sigrun.se).


(2011-ongoing) Board member ESWERC - Ericsson Software Engineering Research Center.


(2010-ongoing) Board member Qtema AB (Expert consultancy company in Requirements Engineering and Verification and Validation) (www.qtema.se).


(2011-ongoing) Area Manager BESQ+ for Business Value: Software Value and Innovation (Ind. Part.: IBM, Ericsson, Qtema – Research Team: 3 post-doc).



(2009-2011) KKS ProVision (research school with approx. 40 PhD students planned for 2010-2018).

              - (2009-2011) Director of ProVision Research School

              -  (2010) Member of application task force

              - (2010-2011) Member of ProVision steering group


(2009-ongoing) Sub-project responsible for BTH, Vinnova EASE: The Industrial Excellence Centre for Embedded Applications Software Engineering, Subproject D (joint research project LTH-BTH, main supervisor for one PhD student fully funded).


(2009-ongoing) Chairman of the Swedish Requirements Engineering Research Network (SIREN)(network of 7 universities and 10 companies- joint research initiatives and technology transfer).


(2009-ongoing) Full board member of the International Software Product Management Association (board member)(standardization of curriculum and certification Europe), http://certified-spm.org/.


(2009-ongoing) Nordic Entrepreneurial Technology Invest AB (board member).


(2006-2008) Spidexa Technologies AB Board (chairman).


(2005-2006) University Board Blekinge Institute of Technology (board member).


(2005-2007) Research Ethics Committee Southeast (board member).


(2004-2005) PhD Section at Blekinge Institute of Technology (chairman).


(2004-2005) Faculty Board at Blekinge Institute of Technology (board member).


(2003-2004) PhD Section at Blekinge Institute of Technology (board member).


(2001-2004) Soft Center Film Society (chairman).


(2001-2002) Blizzway Solutions AB (board member).


(2001-2002) Jobado AB (board technical advisor).


(1998-1999) Blekinge Guild of Commerce (board member).


(1998-1999) ARON (board member, business lesion and sponsor responsible).


(academic part of CV can be seen below, observe - publications listed here or see publication link in the menu)



5.    Scientific Accomplishments

(For publications see link “publications”).


5.1    Editorial, Committees and Refereeing


EDITORIAL WORK

  1. -Coordinating Editor Empirical Software Engineering Journal – EMSE, Springer (2012 – ongoing).

  2. -Engineering and Managing Software Requirements, edited by A. Aurum and C. Wohlin, Springer Verlag, 2005.


JOURNALS (invited reviews, >70 total)

  1. -Journal of Systems and Software - Elsevier.

  2. -Journal of Software: Evolution and Process – Wiley.

  3. -Requirements Engineering journal - Springer.

  4. -Software Quality Journal – Springer.

  5. -Empirical Software Engineering – Springer.

  6. -IEEE Software – IEEE.

  7. -International Journal of Software Engineering and Knowledge Engineering – World Scientific.

  8. -Information and Software Technology – Elsevier.

  9. -Software Process: Improvement and Practice - Wiley.

  10. -Journal of Software Maintenance and Evolution – Research and Practice - Wiley.

  11. -Scandinavian Journal of Information Systems - Association of Information Systems.


ORGANIZING COMMITTEE WORK

- OC of RE’14 – 22nd IEEE International Requirements Engineering Conference, Karlskrona Sweden, 2014.

  1. -PC Chair of RE’12 - Industry and Experience Track. 20th IEEE International Requirements Engineering Conference, Chicago USA 2012.

  2. -Chair International Doctoral Symposium on Empirical Software Engineering (IDoESE'12) co-located with EASE 2012.

  3. -Program Board of RE'11-  Industry and Experience Track. 19th IEEE International Requirements Engineering Conference, Trento, Italy 2011.

  4. -International Working Conference on Requirements Engineering: Foundation for Software Quality (REFSQ), Doctoral symposium, 2011.

  5. -4th International Workshop on Software Product Management (IWSPM’09) in conjunction with RE’10 2010. (PC and Advisory board).

  6. -3rd International Workshop on Software Product Management (IWSPM’09) in conjunction with RE’09 2009. (PC Chair and co-organizer).

  7. -Eight Conference on Software Engineering Research and Practice in Sweden (SERPS’08) (PC Chair).

  8. -European Systems and Software Process Improvement and Innovation Conference 2008 (EuroSPI). (Developed and held Tutorial on Global Software Engineering with Darja Smite, title: ) “Global Software Engineering: Types of Arrangements and Known Patterns”).

  9. -Global Requirements Engineering Workshop 2007 (GREW 2007) in conjunction with ICGSE 2007. (OC Chair and originator).


PROGRAM COMMITTEE WORK (selection presented - reviews and PC work)

  1. -PC member ICSE’2014 - 36th International Conference on Software Engineering, Hyderabad India, 2014.

  2. -PC member of ICSE 2013 (SEIP) - 35th International Conference on Software Engineering, San Francisco USA 2013.

  3. -PC member EASE International Conference on Evaluation and Assessment in Software Engineering (2012 and 2013).

  4. -International Requirements Engineering Efficiency Workshop (REEW) (at REFSQ)(2011, 2012).

  5. -International Conference on Software Business (ICSOB) (2010, 2011).

  6. -Special Session on Measurement as a Strategy for Software Value Management (MeSVAM) at 37th EUROMICRO Conference on Software Engineering and Advanced Applications (SEAA 2011), Oulu, Finland.

  7. -The 4th Software Quality Days (SWQD) conference, Vienna, Austria.

  8. -EmpiRE’11, International Workshop on Empirical Requirements Engineering, collocated at 19th IEEE International Requirements Engineering Conference, Trento, Italy 2011.

  9. -21st IEEE International Symposium on Software Reliability Engineering, 2010.

  10. -International Working Conference on Requirements Engineering: Foundation for Software Quality (REFSQ) (2003, 2005, 2007-2011).

- SQS Nordic, Software and Systems Quality Conference, Sweden 2010.

- The First International Conference on Software Business 2010.

  1. -International Workshop on Software Ecosystems, held in conjunction with the 11th International Conference on Software Reuse 2009.

  2. -International Workshop on Software Economics and Management held in conjunction with the 7th joint meeting of the European Software Engineering Conference (ESEC) and the ACM SIGSOFT Symposium on the Foundations of Software Engineering (FSE) 2009.

  3. -7th joint  meeting of the European Software Engineering Conference and the ACM SIGSOFT Symposium on the Foundations of Software Engineering (ESEC-FSE) 2009.

  4. -International Conference on COMmunication System softWAre and middlewaRE (COMSWARE) 2009.

  5. -International Conference on Software Engineering Approaches For Offshore and Outsourced Development (SEAFOOD) 2009.

  6. -IEEE International Symposium on Empirical Software Engineering and Measurement (ESEM) (2007, 2008, 2010).

  7. -EUROMICRO Conference on Software Engineering and Advanced Applications (SEAA)(2008, 2009, 2012).

  8. -European Systems & Software Process Improvement and Innovation Conference (EuroSPI)(2006-2010).


EXTERNAL EXAMINER (Funding and PhD Level Defense)

  1. -Expert judge software engineering and computer science for the Swedish National Agency for Higher Education - review and evaluation of all Swedish master level educations, 2012/13.

  2. -Thesis committee for Chetan Arora, supervised by Lionel Briand, University of Luxembourg, 2012 and ongoing.

  3. -Grading committee for Andrey Maglyas’ thesis “Overcoming the complexity of software product management”, Lappeenranta University of Technology Finland, 2013.

  4. -Luxembourg National Research Fund (FNR) project expert evaluator (AFR funding program “Aides à la Formation-Recherche”), 2010.

  5. -Examination Committee/external evaluator, PhD defense of JK Balikuddembe, University of Cape Town, 2009. Thesis title: “Managing Economic Value and Uncertainty on Software Projects: An empirical study using the CASSE Framework”.

  6. -Examination Committee/external evaluator, PhD defense of Jayakanth "JK" Srinivasan, Mälardalen University, 2009. Thesis titl elektorer elektorer e: “Exploring The Sources of Enterprise Agility in Software Organizations”.

  7. -Faculty Opponent, PhD Defense of Markus Lindgren, Mälardalen University, 2008. Thesis title: “Towards a Capability Model for Release Planning of Software Intensive Systems”.

  8. -Deputy Examination Committee, PhD Defense of Sophie Hallstedt, Blekinge Institute of Technology, 2008. Thesis title: “A foundation for Sustainable Product Development”.

  9. -Faculty Opponent, Licentiate Defense of Rudiger Lincke, Växjö University, 2007. Thesis title: “Validation of a Standard- and Metric-Based Software Quality Model”.

  10. -Faculty Pre-defense review committee invited, Dissertation of Stig Larsson, Mälardalen University, 2007. Thesis proposal title: “Key Elements of the Product Integration Process”.



5.2    Academic Research Collaborations (Examples)


  1. -BTH subproject responsible and vice project manager EASE - The Industrial Excellence Centre for Embedded Applications Software Engineering (joint collaboration BTH and Lund University and industry partners, main supervisor of one PhD student) Ongoing.

  2. -Prof. Dr. Sjaak Brinkkemper, Utrecht University, co-member of the ISPMA board.

  3. -Collaboration on development of research agendas, joint PhD courses, Mälardalen University. Ongoing.

  4. -Supervision and mentorship of Stefan Schneider, Daimler AG, Group Research & Advanced Engineering Software Technology Department Software Processes and Quality, main collaboration with Prof.Schweiggert,  University of Ulm, Germany. Ongoing.

  5. -Active collaboration with Department of Informatics at University of Zurich, joint industry research with Dr. Samuel Fricker and Prof. Martin Glintz. Ongoing.

  6. -Active continuous collaboration with Lund University, Faculty of Engineering, Joint industry collaboration, joint studies on Quality aspects and non-functional aspects on software development and engineering together with e.g. Richard Berntsson-Svensson, Prof. Björn Regnell, Ongoing.

  7. -Active collaboration with Ass. Prof. Lefteris Angelis, Aristotle University of Thessaloniki, Ass. Prof. Ewan Tempero, The University of Auckland, joint large scale empirical studies, Ongoing.

  8. -Supervisor for two PhD students in Software Engineering at Chalmers University of Technology, 2006 and ongoing.

  9. -Invited to hold guest lecture series at FREE UNIVERSITY OF BOZEN – BOLZANO, 2006.

  10. -Invited to hold guest lectures in Product Management, Chalmers University of Technology Gothenburg, 2006.

  11. -Member of SiREN (Swedish Requirements Engineering Research Network) since 2003.

  12. -Member of IEEE since 2002, Member of ACM since 2006.

  13. -Performed studies and authored papers in collaboration with researchers from Swedish universities (Linköping University and Umeå University), 2005 and ongoing (3 paper co-authored thus far).

  14. -Cooperation with Alan Davis from University of Colorado at Colorado Springs, co-authored 2 papers thus far.

  15. -Cooperation Dr. Aybüke Aurum, University of New South Wales, Australia and Prof. Dr. Barbara Paech University of Heidelberg on GSE, 2010 and ongoing.



5.3    Research Collaborations with Industry


  1. -Research conducted in close cooperation with (and research results transferred to):

    -- Daimler AG, Germany, 2009 and ongoing.

    -- Tolpagorni Product Management, 2009 and ongoing.

    -- Axis Communications, 2011 and ongoing.

    -- Sony Mobile, 2012 and ongoing.

    -- IBM Sweden, 2010 and ongoing.

    -- Volvo PV, 2009 and ongoing.

    -- Qtema, 2009 and ongoing.

    -- Ericsson AB, 2007 and ongoing.

    -- Öresundskraft, 2008-2009.

    -- DanaherMotion Särö AB, 2002-2008.

    -- ABB Robotics 2003 and ongoing.

    -- ABB Corporate Research (Sweden and Switzerland) 2004 and ongoing.

    -- ABB Power Technology Products, 2005 and ongoing.

    -- Volvo Technology (Corporation) (VTEC), 2006-2010.

    -- Spidexa Technologies AB, 2006-2009.


  1. -Key notes/Seminars/Training (Examples)

    -- Keynote Product Management Day 2013, Stockholm, http://produktledardagen.se/

   -- Ericsson AB keynote on “Software Value”, Stockholm, 2011.

    -- Keynote Produktledardagen” 2011, Stockholm, http://produktledardagen.se/

    -- Keynote at Swiss Association for Quality (SAQ) yearly Requirements Engineering Forum, 2010.

    -- Keynote at IBM seminar on Effective Product Management, 2010.

    -- Ericsson Software Research Day, poster, 2010.

    -- Keynote at Swiss Association for Quality (SAQ) yearly Testers Forum, 2010.   

    -- Daimler AG, Germany, 2009 and 2010.

    -- Volvo PV, 2009 and 2010.

    --SWEDSOFT, 2008.

    --SIREN, 2008, 2009, 2010.

    --ABB Power Technology Products, 2007. 2008.

    --Guest lecturer SAST - Swedish Association for Software Testing 2007 and 2008.

    --ABB Corporate Headquarters, Switzerland, 2007.

    --GI-REFPL: Requirements Engineering (Frameworks) for Product Lines Working Group, Switzerland, 2007.

    --Saab Automobile AB, 2006.

    --Infotiv AB, 2006.

    --Radiometer Copenhagen, 2005.

    --Carmen Systems Gothenburg, 2005.

    --ITT Flygt Emmaboda, 2005.

    --Volvo IT Gothenburg, 2004.

    --Vinnova (evaluations and presentations of promising researchers), 2005 and 2006.

    --Industrial Mathematics Ltd., 2003 and 2004.

    --IVT INDUSTRIER AB, 2004.

    --SchlumbergerSema, 2002.

    --ABB Robotics, regularly from 2003 and ongoing.

    --ABB Corporate, regularly from 2004 and ongoing.

    --DanaherMotion, regularly from 2002 and ongoing.


5.4    Research Grants and Applications


Granted/Pending:

- PROMPT node responsible and co-applicant (phase 1 granted, phase 2 pending). (approved)(approx. 30MSEK total).

- Awarded Researcher of the year 2011, BTH.

- “BESQ+” co-applicant, subproject responsible, KKS excellence center, 2010 (approved) (17.5MSEK).

- KKS ProVision 2010 (approved round one)(2MSEK).

- Awarded Ericsson Research Grant, SVA Project from Ericsson research steering group. Senior research funding and smaller part PhD student funding for 2 years with possible extension, 2009-2011.

  1. -Awarded Internationalization Grant, Blekinge Institute of Technology, 2008.

  2. -Awarded special individual research grant, direct industry funding, ABB CRC and DHR, 2006 (research funding for 2 years), 2006.

  3. -Participated in and won the SiREN Experiment and Study Contest in 2004. Allowing the winner to get the submitted experiment replicated at 8 Universities in Sweden.

  4. -Student of the Year award, Blekinge Institute of Technology, 2000.


Not Granted:

  1. -Co-author and Node responsible “Cyclops”, (FP7-SME-2008-2), 2008.

  2. -Co-author "GLOSEC - Global Software Engineering for European Competitiveness", application for STREP to EU Framework 7 (FP7) ICT Call 1 (FP7-ICT-2007-1), May 2007.

  3. -Primary author of main work package and overall primary reviewer of EU grant application in 2005. Application name: Information Sharing and Collaboration Environment for SMEs (ICE) (REF: 035163-FP6).

  4. -Author and Co-author of several applications to Vinnova, VR and KKS (details available on request), 2007 - 2010.



6.    Pedagogical/Supervision Experience


SUMMARY

  1. -PhD Student Advisor (currently total 4 PhD students (of which 3.5 not on faculty funding), progress: 3 finished, 1 licentiate), 2006 – ongoing

  2. -VBMA team member (Strategic quality improvement and assurance project for master thesis education), 2009 – ongoing

  3. -Course responsible and examiner for all Software Engineering Master thesis at BTH, 2009 – ongoing.

  4. -Guest lecturer Chalmers University of Technology, 2006 – ongoing

  5. -Completed course in Research Supervision, FLUS (Forskarhandledarutveckling SydOst), 2008.

  6. -Voted Teacher of the Year 2006 by Blekinge Student Union

  7. -Nominated Teacher of the Year 2005, 2007-2010

  8. -Course responsible/examiner of courses on Bachelor, Master, and PhD level

  9. -Development of courses on Bachelor, Master, and PhD level

  10. -Thesis advisor / Advanced topic advisor

  11. -Head of Department for large student team projects (course/project supervision)

  12. -Published paper on pedagogical development (see publications)

  13. -Advanced courses in pedagogy (FEA018) (15 ECTS credits)



6.1    Supervision (PhD Level)


- FINISHED PHD

(2006 to 2010) Main Supervisor for PhD Student Martin Ivarsson (at Chalmers University of Technology). (Thesis title: “Experience driven software process assessment and improvement”, Subject area: Software Engineering, Research conducted in  cooperation and collaboration with Volvo Technology). Finished, Defended Thesis in 2010.


(2006 to 2011) Main Supervisor/Examiner for PhD Student Mahvish Khurum (Thesis title: “Decision Support for Product Management of Software Intensive Products”, Subject area: Strategic Software Engineering, Research conducted in cooperation and collaboration with Ericsson.) Finished, Defended Thesis in 2011.


(2009 to 2013) Main Supervisor for PhD Student Joakim Pernstål (at Chalmers University of Technology and Volvo Car Corporation). (Thesis title: “Towards Managing the Interaction between Manufacturing and Development Organizations in Automotive Software Development”, Subject area: Software Engineering, Industrial PhD student at Volvo Car Corporation). Finished, Defended Thesis in 2013.


- FINISHED LICENTIATE

(2006 and ongoing)Supervisor for PhD Student Nina Fogelström (Subject area: Software Engineering, Research conducted in cooperation and collaboration with Ericsson.) -- Defended Licentiate Thesis in 2010.


- PRE-LICENTIATE (OR N/A)

(2013 and ongoing) Main Supervisor for PhD Student Hiva Alahyari (at Chalmers University of Technology).


(2013 and ongoing) Supervisor for PhD Student Deepika Badampudi (Subject area: Software Engineering, Component based development.)


(2009 and ongoing) Main Supervisor/Examiner for PhD Student Michael Unterkalmsteiner (Ericsson, ABB, SonyEricsson, Axis joint industry network) (Subject area: Software Engineering, Research focus on co-optimization and alignment of RE and V&V).


(2009 and ongoing) Supervisor for PhD Student Stefan Schneider (at Daimler AG Ulm) (Subject area: Software Engineering, Global Software Engineering). Planned to finish his PhD end 2011.


(2009 and ongoing) Member of supervisory panel for PhD Student Yu-Cheng Tu (at The University of Auckland) (Subject area: Software Engineering, Requirements Engineering).



6.2    Course Development/Responsible/Examiner/Principle lecturer

(Note: Planned, created, developed most course material, gave most lectures and examined all courses in this category)


(2010)Professional (cert.) SCRUM master course. (Development, Management and Examination – industry course).


(2009-ongoing) Master’s Thesis Course in Software Engineering – Master level (30 ECTS credits)(Development, Management and Examination)(Introduction of peer-review process, shadow supervision between universities, advanced level defense, quality assurance process, and rubric based grading to assure homogenous judgments and quality standards)(publication in IEEE Transactions on Education pending)(in collaboration witht: Dr. Robert Feldt, Chalmers, Dr. Niklas Lavesson, BTH)


(2009-ongoing) Configuration Management – PhD level (7.5 ECTS credits)(Developed, held and managed the course)


(2009-ongoing) Research packaging and Technology transfer – PhD level (3 ECTS credits)(Developed, held and managed the course)


(2009)Technology Product Management – PhD level (7.5 ECTS credits) (Developed, held, examined, and managed the course)


(2008-2009) Large-Scale Requirements Engineering - Master level (7.5 ECTS credits)


(2007) Requirements Analysis - Bachelor level (7.5 ECTS credits)(Developed, held and managed the course for Kalmar University)


(2004, 2006, 2008) System Configuration Management - Bachelor level (PAC007) (7.5 ECTS credits)(Developed, held and managed the course)



6.3    Course Co-development/Co-examiner/Co-lecturer


(2008-2010) Software Product Line Engineering at Chalmers - Master level (7.5 ECTS credits)(Shared responsibility for lecturing, examination and course development)


(2004-2008) Requirements Engineering - Master level (PAD001) (7.5 ECTS credits)(Shared responsibility for lecturing, examination and course development)


(2009) Practical Requirements Engineering – Bachelor level (PA1310) (7.5 ECTS credits) (Shared responsibility for lecturing, examination and course development)



6.4    Lecturing (in addition to the above)


(2007-2011) Research Methodology (Guest lecturer in the area of how to conduct research in close cooperation with industry, and how technology and knowledge transfer is achieved from academia to industry)


(2006) Invited Guest Lecturer holding lecture series on Product Management and Market-driven Requirements Engineering at University of Bozen – Bolzano, Italy.


(2004-2009) Verification and Validation (PAD002, 012, 017) (7.5 ECTS credits)(Guest lecturer, development of assignments, development and realization of workshops)


(2004-2006) Project Course InfoCom (PAB008) (15 ECTS credits)(Guest lecturer in Project Management and Configuration Management)


(2004-2006) Small Team Project Course (PAB005) (15 ECTS credits)(Guest lecturer in Project Management and Configuration Management)


(2000) Web Technologies (DPT208) (7.5 ECTS credits)(Lecturer in XML, PHP, Java, Exercise leader and examiner)


(1999-2000) System Hardware Configuration (Theme lecture, Alpha Days)(Server technology, distributed hardware issues, general hardware technology for PC/UNIX systems)



6.5    Advisor and Supervisor (Bachelor and Master Level)


(2011)Master Thesis in Software Engineering (PAD009) (30 ECTS credits)

(2 Thesis / Groups currently under supervision)


(2010) Master Thesis in Software Engineering (PAD2403) (30 ECTS credits)

(6 Thesis / Groups currently under supervision)


(2009) Master Thesis in Software Engineering (PAD009) (30 ECTS credits)

(1 Thesis / Groups currently under supervision, 4 completed)


(2009) Master Thesis in Software Engineering (PAD009) (30 ECTS credits)

(3 Thesis / Groups currently under supervision, 2 completed)


(2008) Master Thesis in Software Engineering (PAD009) (30 ECTS credits)

(4 Thesis / Groups currently under supervision, 3 completed)


(2007) Master Thesis in Software Engineering (PAD009) (30 ECTS credits)

(2 Thesis / Groups completed)


(2006-2007) Master Thesis in Software Engineering (PAD009) (30 ECTS credits)

(3 Thesis / Groups Completed)


(2003-2004) Bachelor Thesis in Computer Science (DVC001) (15 ECTS credits)

(4 Thesis/Groups supervised with completed results)


(2004-2006) Head of Department (supervisor for a project during 20 weeks)

(2 groups supervised in 2004 and 3 in 2005, all successfully completing their commitments)


(2004-2007) Advanced Topic in Software Engineering (PAD004)(7.5 ECTS credits)

(Supervision of a “mini-thesis” often used as a preparation to Master Thesis work)(6 groups supervised).


________________________________________________________________________________________


References can be obtained upon request.



 

c v